ADXM362A玻璃直線斜邊機，采用PLC控制加工玻璃的厚度和角度，適用于磨削不同平板玻璃的斜邊，粗磨、精磨、拋光和底邊工序一次完成。該機采用兩個底邊，可以使底邊磨削時達到拋光效果，前壓板有升降調節系統，可以根據玻璃的大小而調節，前后壓板均采用加厚鋼板，剛性強、傳動平穩、加工精度高；采用無極變速，可以任意調節加工速度，操作簡單、實用性強。 ADXM362A Glass straight line beveling machine, using PLC to control glass thickness and angle, suitable for grinding flat glass with different bevel edge, coarse grinding, fine grinding and polishing(include bottom edge) can be finished at one time. Two grinders are used to fine grinding and polishing bottom edge. The front pressing plate can be adjusted by a lifting system according to glass size. The front and back pressing plate are using with thicker steel plate, in order to make machine stronger, transmit steadier, and higher working accuracy. Also, working speed can be adjusted at will by continuously variable mechanism transmission, this make operation very easy. 主要技術參數   TECHNICAL PECIFICATIONS   電壓 功率 voltage Power 380v/50Hz 24.5kw 380v/50Hz 24.5kw 加工斜面角度 斜面較大寬度 Bevel angle Max bevel width 0°-35° 40mm 0°-35° 40mm 加工玻璃厚度 進料速度 Glass thickness Feeding speed 3-19mm 0.5-5m/min 3-19mm 0.5-5m/min 玻璃較小尺寸 機臺重量 Min size Weight of machine 30x30mm 4100kg 30x30mm 4100kg 外形尺寸   Size(LxWxH)   6800x1300x2500mm   6800x1300x2500mm